Behind The Production Of Safety Helmets, There May Be Credits For Water Sandpaper.

1) After the carbon fiber helmet is molded, there will be a more obvious parting line, which will not only affect the appearance and feel, but also not conducive to the next step of painting. It needs to be polished and removed with water sandpaper (recommended particle size P180-P400).

 

2) After the primer is applied to the helmet, the next step of the topcoat spraying process can be carried out after manual sanding with latex waterproof sandpaper (recommended particle size for paint repair is P600-P1000).

 

3) After the topcoat is sprayed, there will inevitably be some raised defects, which need to be removed with silicon carbide waterproof paper.

 

Does affordable, easy-to-use, and inexpensive water sandpaper exist? Golden Abrasives said yes, let's get to know each other.

 

SC36 is a cost-effective, multi-purpose wet and dry sandpaper. The grinding speed is fast, the line consistency is good, and the service life is long. The product has a complete particle size, which can meet the grinding and polishing requirements of full particle size and multi-material.

 

01. Adopt high flexibility back base, dry and wet dual-use without curling.

 

02. Using industrial waterproof resin, the product is water and oil resistant.

 

03. Selected ore, fast grinding, can effectively improve production efficiency.

 

04. The waterproof latex paper has good flexibility and is not easy to break, reducing the cost of factory use.

 

05. Good sanding and conformability, comfortable hand feeling, easy to hold and polish.

 

How to use:

 

01. The outer board stacks up the silicon carbide automotive waterproof paper for wet grinding, and the inner board folds the sandpaper and then wet sands.

 

02. Cut the Abrasive waterproof sandpaper into 1/4 or 1/6 sheets and stack them in your hands.

 

03. Soak the silicon carbide sandpaper in the water fully before grinding, generally not recommended for more than 24 hours.

 

04. If the sandpaper curls during the soaking process, you can press it with a rubber briquetting block.