Do You Know The Correct Way To Use Sandpaper Tape?

The dust produced during the grinding process of the sandpaper belt is a large, harmful substance. It is recommended to wear a mask at all times. In addition, products such as copper, lead, carbon fiber, glass fiber, etc., the dust can easily damage the skin during the grinding process, so we must wear rubber gloves and rubber protective clothing if necessary. Dust will flutter during the sanding process. Water mills can reduce a lot of dust, but they can also pollute the water. It is recommended to use a special bucket, a bucket with multiple buckets.

Start with a low mesh number, which is not easy to block the sandpaper belt, and the powder is easy to collect, so a water mill cannot be used. After each dry grinding, the powder should be cleaned up to confirm whether the surface sandpaper marks are uniform and straight. If desired, use the next item number. At this time, the grinding direction should form a larger angle with the previous pass.

When the mesh number is as high as 800 mesh, it needs to be soaked in water for polishing. Mainly after each cleaning, in addition to cleaning the sandpaper with a clean cloth or paper, clean the sand on the surface of the workpiece with a clean cloth or paper. To ensure that there is no low-grit sand on the surface, change it to high-grit sandpaper. At this time, it is recommended that at the end of each day, a bucket with several items should be kept to reduce environmental pollution.

The number of grids is somewhat high. For example, after 2000 and 5000 meshes, observe the sandpaper blockage at any time. Sandpaper strips are useless after clogging, but may cause localized overheating of bonding. Once the sandpaper is clogged, it should be cleaned carefully with water or oil.