What Abrasive Paper Should Be Used For Polishing Wood?

Abrasive paper is one of the commonly used tools in woodworking. It can be used to polish wooden products to make them smoother. The abrasive paper widely used for polishing wooden products is called "wood abrasive paper". It is usually dry abrasive paper, while water abrasive paper and iron abrasive paper can also be used for polishing wood, but they are generally used less frequently. Wood abrasive paper can be used to polish wood at various stages of processing, but different types of abrasive paper for wood should be selected for different stages. Let's take a look at which kind of wood abrasive paper is best to use.

The types of abrasive paper for polishing wood

Wood products and wooden furniture usually require polishing to make the surface smooth. Remove any roughness, dust, and bubbles from the surface coating, and roughen the surface of the coating to improve its adhesion. The abrasive paper commonly used for polishing wood is called "abrasive paper". There are mainly three types of abrasive paper used for polishing wood:

Abrasive paper for wood

The most commonly used abrasive paper is used for polishing wood. Generally, use the appropriate model of wood abrasive paper to sand along the grain. For areas where the wood is not smooth enough, you can use abrasive wood paper wrapped around small pieces of wood or hard rubber to polish it.

 

 

Water abrasive paper

Water-abrasive paper can also be used for polishing wood, but it is not commonly used because water-abrasive paper needs water for sanding, which may affect the wood.

Which type of wood abrasive paper is best to use?
When polishing wood, it is necessary to choose the appropriate abrasive paper; usually, using wood abrasive paper is better. It can be used for polishing white-core wooden products to wood materials and only needs to change the model of the wood abrasive paper according to different polishing stages. So, what model of abrasive paper is suitable for wood abrasive paper?

Normally, for wooden products in a white-core state, 80-grit wood abrasive paper is commonly used for polishing, mainly to remove dirt such as wood wool, scratches, glue marks, and pencil marks on the wood. Then, use 360-grit wood sandpaper for edge finishing and rough polishing, which is a flat polishing process that can be done using wood sandpaper wrapped around small wooden blocks or hard rubber for large flat surfaces. After the wooden product is painted. The primer is fully polished using 360-grit wood sandpaper, and then 600-grit sandpaper is used to smooth out any sand marks. For the final polishing stage,1000-1500-grit wood sandpaper is used for full polishing, and after polishing to a bright finish, the surface paint can be sprayed.