banner
Zirconia Film Abrasive Disc

Zirconia Film Abrasive Disc

Zirconia film abrasive discs use high-quality zirconium oxide alumina particles and a flexible film backing to quickly remove burrs, oxides, and stains. Their perforated design ensures efficient debris removal and makes them suitable for both dry and wet grinding and polishing. These discs combine durability, heat resistance, and anti-clogging properties to enhance productivity in automotive and metalworking applications.

Product Introduction

Jiangxi Golden Abrasives Co., Ltd. is one of the leading manufacturers and suppliers of zirconia film abrasive disc in China. With abundant experience, we warmly welcome you to wholesale customized zirconia film abrasive disc at competitive price from our factory. If you have any enquiry about free sample, please feel free to email us.

 

polyester sanding disc green

What does 17 holes actually change on the floor?
Every hole is an area without grain, so a 17-hole zirconia sanding disc gives up a little cutting surface per pass. Connected to a proper vacuum, the trade flips in your favour:

  • The 17-hole abrasive film disc stays clean. Dust leaves through the pad before it packs into the coating, so cutting stays true until the grain is genuinely worn - you change discs for wear, not for loading.
  • Less dust in the air at the panel. Most of it goes down the hose instead of onto the next grit.
  • Water drains instead of skating. Switch to wet sanding, and the same holes let water and slurry pass through the pad, so the disc keeps contact with the panel instead of hydroplaning on a film of water.

 

Why is it PET film?
The PET backing is thinner and more willing to follow a contour than a rigid disc, which is where it earns its keep:

  • Wheel arches, pillars and bumper curves on cars
  • Chair legs, handrails and profiled woodwork
  • Tanks, railings and curved metalwork in fabrication shops

 

Stable Grinding Effect: Zirconia film abrasive discs feature a high-quality polyester film with excellent wear resistance, flexibility, and tensile strength. Even in harsh grinding environments, zirconia film discs ensure consistent performance and greatly extend product life. The fine grinding capability of these abrasive film discs effectively reduces scratches, ripples, and other defects, providing an ideal surface for subsequent coating, electroplating, welding, and other processes.

 

Wet sanding with the same disc?
Wet or dry, this is one zirconia abrasive film disc. Film backing does not drink water the way paper does - no swelling, no soft edges, no curl when it dries overnight. The 17 holes do the rest: water and slurry pass through instead of sitting between disc and panel, which is what causes hydroplaning, uneven cut, and the odd deep scratch that shows up after buffing.
How shops run it:

  • Keep coarse work dry. P80–P240 with extraction is faster and cleaner than flooding the panel.
  • Wet from P600 up. Clear coat refinement, blend edges, and finish sanding - water keeps the grain cool and the cut fine.

 

Zirconia Film Abrasive Disc Specifications

Type

AG312

Specification

150mm 17Holes

Grit Range

P40-P2000

Grain

Zirconium Alumina

Backing

Polyester film backing

Bonding

Resin over Resin

Coating

Semi-open Coating

Anti-clogging Layer

Invisible Coating

Application

Woodworking, Automotive Refinishing, Metalworking

Package

P40-P60: 50pcs/customized box, 1000pcs/carton

P80-P2000: 100pcs/customized box, 2000pcs/carton

(Customized packages are available)

 

Grit Selection Guide
Grit Range Typical Sanding Stage Common Uses
P40–P80 Coarse sanding Heavy material removal, paint removal, and rough surface preparation
P100–P180 Medium sanding Body filler shaping, leveling, and general surface preparation
P220–P400 Fine preparation Primer sanding and surface refinement before coating
P600–P800 Fine sanding Finer surface preparation and reducing sanding marks
P1000–P2000 Very fine sanding Fine surface refinement and preparation for subsequent finishing processes
zirconia film abrasive disc for automotive refinishing

Golden Abrasives is a professional manufacturer of large rolls of film sand. Our abrasive film products are exported to Europe, South America, Southeast Asia, South Africa, and other markets. Customers report that its performance can reach 80% of Sunmight film L312T. If you are looking for cost-effective abrasive film products, please feel free to contact us by email: sales@goldenabrasives.com.

 

 

FAQ

 

 

01. Do you support designing our packaging?

Yes, we support OEM service.

02. Is it compatible with a wet sanding system?

Yes, the film backing prevents warping when wet-coated on the automotive clear coat or marine surfaces.

03. Can you provide free samples?

Yes, we will provide free samples for you to test.

Hot Tags: zirconia film abrasive disc, China zirconia film abrasive disc manufacturers, factory, 3m purple finishing film disc, sunmight l312T, Zirconium Abrasive Polishing Pet Film Sanding Disc, blue film sanding disc

You Might Also Like

(0/10)

clearall